AHT Cooling Systems GmbH
page 4
1 Safety
General information for the manual and safety
This operating manual (hereinafter the “manual”) forms part of the device and enables a safe and efficient
operation. The safety section provides information about important safety aspects for the protection of persons,
things and materials. Task-related warnings/notes are contained in the individual chapters.
The complete manual can be found electronically on our website
AHT Cooling Systems USA, Inc.
7058 Weber Blvd.
Ladson, SC 29456
USA
Phone:
+1 (0) 843/767 6855
Fax:
+1 (0) 843/767 6858
Email:
This manual is intended for the following
target groups:
Operator
Operating staff
Qualified staff:
AHT service partner, AHT service technician, AHT customer service, AHT installation
service, AHT assembly service
Staff
: This term is used when the manual is addressed to all target groups.
This manual must be available and accessible to the local staff.
The staff must read the manual carefully before use.
All figures represent symbolic representations.
Limitation of liability
All the details in this manual were compiled in consideration of the standards and legal regulations applicable at
this time, as well as the experience of the manufacturer and qualified staff.
The manufacturer accepts no liability
for damage to persons or things (devices, goods, etc.) resulting from:
Non-observance of the manual and the regulations/safety instructions contained therein.
Failure to comply with the local safety regulations.
Inappropriate use (misuse)
Use of unauthorized and non-trained staff.
Unauthorized equipment conversions and technical modifications by the operator himself.
Use of non-approved spare parts by the manufacturer.
Failure of the power supply or electro technical safety devices.
Typesetting and print errors.
Failure to observe the above points will invalidate the warranty claims.
The contractual obligations agreed to under the contract, the general terms and conditions of sale and delivery
of the “AHT Cooling Systems GmbH” (hereinafter “AHT”) and the statutory provisions applicable at the
conclusion of the contract apply.
Technical specifications are subject to change without notice.
The local commercial law regulations and safety regulations/provisions and the essential health and safety
requirements of the unit apply.
Explanation of symbols
Safety and warning notices are indicated in this manual by
symbols
and
signal
words
. Signal words refer to
the risk level of the hazard.
Signal word
Meaning
Hazard with moderate risk level.
Could result in danger to life or serious injury if not avoided.
Hazard with low risk level.
Could result in minor or moderate injury if not avoided.
Individual notes or important collective notes to avoid material or property
damage.
CAUTION
NOTICE
WARNING
