manualshive.com logo in svg

ahlmann AL 65, Руководство по эксплуатации

Поделиться
Скачать
ahlmann AL 65 Скачать руководство пользователя страница 95

7-4

K65C/K75C/K95C

7-4

K65C/K75C/K95C

1

2

1

2

(17) Switch the hydrostatic drive
motor to free oil flow before towing.
For this purpose, screw in the set-
screws at both high pressure relief
valves (7-5/arrows) of the drive pump
until they are level with the hexagon
nuts (size 13) loosened beforehand.
Then tighten the hexagon nuts.

NOTE

After towing has been completed,
loosen the hexagon nuts again.
Screw the setscrews out of both
high pressure relief valves until they
stop. Tighten the lock nuts.

(18) Remove the chocks (if
applicable).

DANGER

- More power is required to steer if

the engine has failed.

- Tow the loader at walking speed

(2 km/h).

- The towing distance should not

exceed 1 km.

- For a longer distance, the defec-

tive loader must be loaded onto a
truck (for the lashing points, see
7-2/1, 7-2/2 and 7-6/1).
- The max. permissible load of

the shunting and towing
coupling (7-2/2) is 4.5 t hori-
zontally in the longitudinal
direction.

- The max. permissible load of

the lashing points/load-bearing
points (7-2/1 and 7-6/1) is 2.0 t
at an assumed bracing angle
of 45°.

Figure 7-5

Figure 7-6

(17) Switch the hydrostatic drive
motor to free oil flow before towing.
For this purpose, screw in the set-
screws at both high pressure relief
valves (7-5/arrows) of the drive pump
until they are level with the hexagon
nuts (size 13) loosened beforehand.
Then tighten the hexagon nuts.

NOTE

After towing has been completed,
loosen the hexagon nuts again.
Screw the setscrews out of both
high pressure relief valves until they
stop. Tighten the lock nuts.

(18) Remove the chocks (if
applicable).

DANGER

- More power is required to steer if

the engine has failed.

- Tow the loader at walking speed

(2 km/h).

- The towing distance should not

exceed 1 km.

- For a longer distance, the defec-

tive loader must be loaded onto a
truck (for the lashing points, see
7-2/1, 7-2/2 and 7-6/1).
- The max. permissible load of

the shunting and towing
coupling (7-2/2) is 4.5 t hori-
zontally in the longitudinal
direction.

- The max. permissible load of

the lashing points/load-bearing
points (7-2/1 and 7-6/1) is 2.0 t
at an assumed bracing angle
of 45°.

Figure 7-5

Figure 7-6

Содержание AL 65











































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды