ahlmann AL 65, Руководство по эксплуатации

Страница: 122 / 138

9-2 K65C/K75C/K95C 9-2 K65C/K75C/K95C
Malfunction Possible cause Remedy
Defect in the drive Filter is clogged Replace the filter insert
and working (section 8.2.13)
hydraulics
Lack of oil in the Top up the oil
hydraulic oil reservoir
Electrical connections to Connect according to
the axial piston pump are the wiring diagram
loose, disconnected or
or clean
oxidised
High-pressure valves are Clean
soiled
Defects in the Parking brake does not Check the setting; if
braking system hold the loader necessary, readjust *
Check whether the
electr. drive cut-off
is connected to the
brake lever
Heating/ventilation Fuse in the fuse box is Replace the fuse
has failed defective
Hose couplings of Increased pressure Carefully loosen the
the attachments resulting from influence coupling at the hose
cannot be of heat on the attachment end above the quick
connected coupling; oil sprays off;
the excess pressure
drops. Tighten the
coupling
NOTE
Make sure that the
collected oil cannot
cause any pollution
Increased pressure in the Stop the engine.
basic loader Remove the pressure
in the lines by moving
the valve lever for the
auxiliary hydraulics
(4-12/1) back and forth
several times
Malfunction Possible cause Remedy
Defect in the drive Filter is clogged Replace the filter insert
and working (section 8.2.13)
hydraulics
Lack of oil in the Top up the oil
hydraulic oil reservoir
Electrical connections to Connect according to
the axial piston pump are the wiring diagram
loose, disconnected or
or clean
oxidised
High-pressure valves are Clean
soiled
Defects in the Parking brake does not Check the setting; if
braking system hold the loader necessary, readjust *
Check whether the
electr. drive cut-off
is connected to the
brake lever
Heating/ventilation Fuse in the fuse box is Replace the fuse
has failed defective
Hose couplings of Increased pressure Carefully loosen the
the attachments resulting from influence coupling at the hose
cannot be of heat on the attachment end above the quick
connected coupling; oil sprays off;
the excess pressure
drops. Tighten the
coupling
NOTE
Make sure that the
collected oil cannot
cause any pollution
Increased pressure in the Stop the engine.
basic loader Remove the pressure
in the lines by moving
the valve lever for the
auxiliary hydraulics
(4-12/1) back and forth
several times