10. Measuring operations
10.2.3 Double display
On all double-function sensors incorporating a
temperature sensor on the first channel the
temperature value can be displayed at the
same time in the function field.
Set device locking to 0.
(see 13.2)
Select 2nd channel.
To activate temperature display, press and hold down
M
▲
To return to the channel display, press and hold down
M
▲
10.3 High / low peak values memory
From all the measured values acquired for
each measuring point the highest and the low-
est values are continuously recorded. To dis-
play these high / low peak values first the de-
sired channel must be set (see XREF) and
then the
MAX
or
MIN
key must be pressed.
The display also includes the associated sym-
bol.
To display maximum value press
MAX
To display minimum value press
MIN
If the maximum value recorded lies above the associated limit value, both val-
ues will be displayed in red; if the minimum value recorded lies below the asso-
ciated limit value, both values will be displayed in blue.
(see 11.1.3)
To delete maximum value, press and hold down
MAX
To delete minimum value, press and hold down
MIN
To return to the measuring point display
M
▲
Whenever this memory is cleared, the current measured value will appear (be-
cause measuring is continuous).
10.4 Individual value memory
The ALMEMO
®
2470-2 can save 99 individual
values to memory locations P01 to P99. The
measured data can be shown on the display or
output via the interface. To save each such
measured value press
MEM
.
The function
field will show the memory location for about
one second. e.g.
P02
26 ALMEMO 2470
