9. Display and keypad
9.2 Keypad
To operate the device a keypad with 7 keys is provided.
Basic functions
Key
To switch the device ON (
s. 7.6
)
ON
To switch the device OFF
ON
press and hold down
To select measuring points (s. 10.2.1)
M
▲
or
M
▼
To display maximum value (s. 10.3)
MAX
To delete, press and hold down
To display minimum value (s. 10.3)
MIN
To delete, press and hold down
To zero-set the measured value (s. 10.5)
PROG
,
►
To delete
PROG
,
FCT
To save the measured value (s. 10.4)
MEM
To select functions (s. 11)
FCT
To cancel function (ESC):
◄
9.3 Entering data
When a programmable parameter is selected (see 11, 13) and unlocked
(see 13.2) the value can be either deleted or programmed.
To
program
press
PROG
You should now be in
programming mode
The input position flashes
To delete the programmed values press:
FCT
To change the arithmetic sign.
M
▼
To
increment
the selected digit press
M
▲
...
To
decrement
the selected digit press
M
▼
...
To move forward to the next position press
►
To
move back
to the previous position press
◄
Each position is programmed just like the first
M
▼
/
M
▼
...,
►
...
To
save
and exit press
PROG
To
cancel
without saving press
◄
...
To
confirm
this input (OK):
►
Input flashes
To
cancel
inputs (ESC):
◄
Input flashes
22 ALMEMO 2470
