2
2
Italiano
THIS HELMET’S SHELL IS MADE OF FIBER
THIS HELMET’S LINER IS MADE OF POLYSTIRENE (EPS)
1
2
1) VISIERA
1.1) Meccanismo Visiera
Alloggiamento superiore per centraggio visiera
Alloggiamento inferiore per centraggio visiera
Denti base movimento
Foro per centraggio visiera
Dente visiera
La visiera è in policarbonato antigraffio ed è dotata di un foro per il centraggio della visiera negli
appositi alloggiamenti posti sulla base movimento. Il dente della visiera interagisce con i denti
della base movimento per consentire la stabilità in apertura della visiera nelle diverse posizioni.
1.2) Rimozione/Installazione Visiera
Vi consigliamo di eseguire le operazioni che seguono ap-
poggiando il casco su una superficie piatta.
Per rimuovere la visiera, abbassarla fino alla totale chiusura.
Partendo da un lato del casco, svitare la vite in alluminio e
rimuoverla unitamente alla placchetta anti-rotazione in plastica.
Ripetere l’operazione dall’altro lato e rimuovere la visiera.
Per installare la visiera, unire i componenti come mostrato in
figura e stringere la vite in alluminio con un cacciavite. Ripetere
l’operazione dall’altro lato. Alzare la visiera e verificarne il buon
funzionamento.
N.B. Nel caso in cui la visiera non aderisca perfettamente
al profilo del bordo in gomma del casco, potrebbe essere
necessaria una regolazione o sostituzione della base mec-
canismo visiera. In questo caso rivolgersi ad un punto di
assistenza AGV.
1
2
1
2