2
15
To open or close the air inlets, move the cursor until it clicks
into position.
To open or close the air inlet, move the cursor until it clicks
into position.
To open or close the muzzle air inlet, raise or lower the air inlet
mechanism.
The nose guard can be removed, gently extracting it from its
housing. To refit it, insert the plastic bands onto their hooks
and check that it is secure.
1
2
3
4
CLICK!
CLICK!
3) INNERS
Cap
Right cheek pad
Left cheek pad
Throat wind shield
The cap, right and left cheek pads and wind shield are removable and washable. To remove
and install the inners, follow the instructions and observe the figures below. To wash the inners,
please see the “Safety Warning” booklet.
3.1) Cheek pad Removal/Installation
To remove the cheek pads, grip them at the front near the
helmet chin strap and pull in the direction of the arrow to free
them from the press studs (1).
Remove the plastic band positioned between the outer shell and
the EPS shell, moving in the direction indicated by the arrow,
and remove the cheek pads, passing the closing strap through
the holes and extracting them from the helmet (2).
To refit the cheek pads, slide them into the helmet, slotting the
strap into the appropriate hole (3).
Insert the plastic band between the EPS shell and the ou-
ter shell, moving in the direction indicated by the ar-
row and pressing the press studs in place (4). Check
that the cheek pads are perfectly secured to the helmet.
N.B. Ensure that the plastic band is correctly centered
and inserted between the EPS polystyrene inner and the
outer shell so that the fabric of the cheek pads does not
crease.
