INSTRUCTIONS FOR USE
AGP 1000 – 2000 PRO
Rev.02/2019
29
Figure 6.3
6.4
Adjustable wheel track
The wheel axle on all trailed mist blowers is connected to the chassis in such a way as to enable a
continuously variable track width adjustment. Each axle is laterally attached with four screws,
which should be slightly loosened to change the width (the chassis must be lifted from the ground)
and then removed or pushed into the carrying tube with the wheel to achieve the desired track
width. Then tighten the screws to re-attach the axle (1 - Figure Figure 6.4) and secure them with a
counter nut to avoid subsequent accidental loosening of screws.
[cm]
AGP 1000 PRO
AGP 1500 PRO
AGP 2000 PRO
D1
95
102
114
D2
127
145
160
Figure 6.4
