agromaster F 1000, Руководство оператора и запасные части

Страница: 22 / 105

21
6. ATTACH OF THE MACHINE TO THE TRACTOR
The power of tractor should be convenient to the machine
has a pto shaft, pto rotation must be 540 rpm) which mentioned
in technical specification.
Air pressure in the tractor’s tires must be sufficient.
It is inconvenience within motion area of lifting levers.
It is absolutely forbidden to stand between tractor and equipment
while adjusting middle lever.
It is absolutely forbidden in space between tractor and equipment
with engine running and without hand brake pulled.
If your machine has hydraulic system the both side of system
should be under pressure while connecting the hydraulic hoses
of machine to tractor’s hydraulic system.
If your machine has electric system, electric and sensor
connections should be connected safely. (if your machine 1.
2.
3.
4.
5.
6.
7.
6.2. TRANSPORTING OF THE MACHINE AND STABILITY
OF THE TRACTOR AND THE MACHINE DURING TRANSPORT
Comply with transport regulations and highway limits.
When driving on public roads, pay attention traffic lights and indicators.
Any transport accessories must be provided with suitable signs and guards.
It is very important to remember that road holding capacity as well as direction
and braking capacity can be influenced, sometimes considerably by equipment
being either carried or towed.
When taking bend, calculate centrifugal force and centre of gravity will shift
depending on whether equipment is being carried or not.
For transport adjust and fasten side lever chain. Lock hydraulic
lifting control lever.
For displacements beyond working area, equipment must be placed in
transportation position.
When dimensions of carried or partially carried equipment conceal
tractor’s signaling and lighting devices, these must also be installed on
equipment itself, in conformity with regulations of highway of country
involved. When in operation make sure that lighting system is
in perfect working order. It is also important to remember that
correct signaling sequence of headlights includes. 1.
2.
3.
4.
5.
6.
7.
8.
6.1. ADJUSTING AND ATTACHING
OF THE CARDAN SHAFT
The cardan shaft that is given together
with machine is standard size. If cardan
shaft is longer, you can cut it to shorten
as shown in figure 5 and figure 6.
As shown in figure 5, minimum 15 cm
part of cardan shaft must be
overlapped when shaft
is pulled away.
Max
Min ( 15 cm )
Min
Min ( 4 cm )
As shown in figure 6, minimum 4 cm
spaces must be kept when shaft is
engaged to the end.
Fig. 6
Fig. 5