Agrisem DS1100, Руководство пользователя

Страница: 34 / 49

34
The wheel must be turned regularly, approximately one turn per second. The number of turns is
approximate and can vary depending on the terrain.
The machine must be hitched to the tractor and slightly lifted while carrying out this operation. You are
also advised to half-fill the seed hopper to make it easier to turn the wheel by hand.
If there is a lot of dust from the seed preparation, this can reduce the flow rate. A second test must
therefore be carried out.
3.1.2.8. Flow rate test
3.1.3. Metering table for the DS610 and DS1100
The quantities given in the table are for information only, they may vary due to dust,
humidity or if the densities are different.
For accurate sowing, please refer to the table in page 35 METERING TEST
N.B. A small seed requires a smaller opening than a large seed.
A round seed requires a smaller opening than an elongated seed.
A heavy seed requires a smaller opening than a light seed.
Seeder width Number of times to
turn the sun wheel.
Multiply the result by 40
to obtain the flow rate per
hectare
3m 30
4m 22