32
3.1.2.5.
Adjusting the position of the tongues on the moveable
base
The moveable base of the hopper is fitted with tongues. They are all fitted to the same shaft and
controlled by the same device. However, each of them can be individually adjusted to achieve
optimum accuracy. The machine is pre-set as standard using a positioner on the control shaft.
To alter this standard setting, simply use the tongue adjustment screws to change the position.
It is essential to check ALL the tongues before each time the seeder is used. When the
moveable base control lever is in position 1, ALL the tongues must be resting on the groove
without forcing.
3.1.2.6.
Batcher calibration
Check that the batchers are open and the hatches are not closing the seed pitch.
Before filling the hopper, connect the agitator bushing to the variator spindle and check beforehand
that there is nothing in the hopper.
Adjust the batcher position lever:
to the right A WIDE pitch for wheat, barley, etc.
centre B MEDIUM pitch for sunflowers, peas, etc.
to the left C NARROW pitch for alfalfa, rape, etc.
Adjust the moveable base lever:
In position 1 for fine seeds
In position 3 for wheat and barley
In position 5 for very large seeds
To empty the hopper place the trough must be placed under
the batchers.
and move the lever further on than position 5
A
B
C
1
3
5
Содержание DS1100
