Agrisem DS1100, Руководство пользователя

Страница: 29 / 49

29
1/ Ensure the machine is unhitched on stable ground.
2/ Unlock the machine before unfolding it
3/ Unfold the machine if it folds
4/ Lower the machine with the drawbar and the trailed or semi-mounted kit.
5/ Disconnect the hydraulic hoses if the machine has them. If you are using a towing hook,
disconnect the hydraulic hoses last to be able to correct the height of the drawbar.
6/ Disconnect the plug for the lighting equipment.
7/ Unhitch the machine
3.1.2. Adjustments / Use
3.1.2.1. Adjusting working depth using the roller
The working depth for the rear disks is controlled by the roller. This also levels and compresses the
soil after the disks have loosened it.
There are several working depth settings thanks to the Agrisem "MULTISTOP" .
The lowest position corresponds to the minimum working depth, here position 1
The highest position corresponds to the maximum working depth, here position 15
Position A corresponds to the position of the roller in relation to the Disc-O-Mulch. This is the
position in which the roller kit and the rear row of disks are the closest. This is the standard mounting
of a roller kit on a Disc-O-Mulch.
Position B corresponds to the position in which the roller is the furthest away for greater distance
between the roller kit and the rear row of disks.
Positions C and D correspond to the bottom roller stop. This allows you to limit the travel of the
roller arm between the lower and upper stops.
ADVICE
:

As soon as the working position allows it, block the roller arms using the lower stop pins. This
avoids friction between the roller arms and the multi-stops which could result in premature
wear.

It is the setting of the multi-stops and therefore the height of the roller which influences the
working depth. A Disc-O-Mulch works on the surface (between 2 and 6cm) at a high forward
speed (approximately 12km/h).
Example: