Agrisem DS1100 Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 49

background image

28

3.1.1.1.

Tractor-mounted machine



Hitching a tractor-mounted machine:

1/ Ensure the machine is on stable ground

2/ Bring the tractor up to the coupling on the machine.
3/ Place the lower link arms in line with the drawbar couplings.
4/ Hitch the lower link arms using the appropriate equipment.
5/ Adjust the length of the top link and attach it using the pin and clip provided.
6/ Lock all the hitch pins with lock handles using the clip pins.

7/ Connect the hydraulic hoses if the machine has them.

8/ Connect the plug for the lighting and check that it is operating

(optional)

9/ Lift the machine

10/ Fold the side extensions to transport it if it folds.
11/ Lock the machine for transport if it folds using the hydraulic controlled hook or mechanical

locks.

12/ Ensure that everything is correctly connected and locked and that no there are no foreign

bodies on the machine.



Parking:

1/ Ensure the machine is unhitched on stable ground.

2/ Unlock the machine before unfolding it

3/ Unfold the machine if it folds

4/ Disconnect the hydraulic hoses if the machine has them.

5/ Disconnect the plug for the lighting equipment.

6/ Unhitch the machine

3.1.1.2.

Trailed machine



Hitching a trailed machine:

1/ Ensure the machine is on stable ground

2/ Bring the tractor up to the coupling on the machine.
3/ Hitch the machine to the coupling ring or to the tractor’s three-point hitch depending on the

type of drawbar attachment.

4/ Connect the hydraulic hoses if the machine has them according to the colour code. If you

are using a towing hook, connect the hydraulic hoses first to correct the height of the
drawbar.

5/ Connect the plug for the lighting and check that it is operating

(optional)

6/ Lift the machine with the drawbar and the trailed or semi-mounted kit.

7/ Fold the side extensions for transport.

8/ Lock the machine for transport if it folds using the hydraulic controlled hook or mechanical

locks.

9/ Ensure that everything is correctly connected and locked and that no there are no foreign

bodies on the machine.

Take into account the clearance during transport, in particular to pass under

bridges and low power lines)

Take into account the clearance during transport, in particular to pass under bridges

and low power lines.

On tractor-mounted machines, the drawbar must be hitched to the top holes on the

lower arms. This improves the stability of the machine when working.

«
...
26
27
28
29
30
...
»

Содержание DS1100


















































Отзывы:

Нет отзывов

Похожие инструкции для DS1100

Thiele Technologies Streamfeeder Reliant 1500

Бренд: Barry-Wehmiller Страницы: 72

Бренд: flexcell Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды