Agri-Fab Platinum 45-0550 страница 8 Скачать руководство пользователя

Страница: 8 / 16

aTTaCH THe PUSHeR WaLLS TO THe
BULkHead

STeP 11:

(See fIGURe 11)

•

Stand the left pusher wall assembly (8) upside down
as shown.

•

Stand the bulkhead (12) upside down with the hole
closer to the ground and the flat side against the left
side (less angle) of the pusher wall assembly.

•

Attach the left pusher wall assembly to the bulkhead
(12) using three hex bolts (N), washers (G), and hex
nuts (H) and tighten.

•

Add a second hex nut (H) to each hex bolt and tighten.

fIGURe 11

STeP 12:

(See fIGURe 12)

•

Stand the right pusher wall assembly (8) upside down
as shown.

•

Make sure the right side (less angle) of the pusher wall
assembly is against the bulkhead.

•

Attach the right pusher wall assembly to the bulkhead
(12) using three hex bolts (N), washers (G), and hex
nuts (H) and tighten.

•

Add a second hex nut (H) to each hex bolt and tighten.

TIP:

Turn the entire pusher wall assembly with the

attached bulkhead right side up to install the hex bolt (N)
closest to the hole in the bulkhead.

fIGURe 12

Содержание Platinum 45-0550

















Результаты поиска

Содержание Platinum 45-0550

Отзывы:

Похожие инструкции для Platinum 45-0550

Бренды по названию

Популярные бренды

Agri-Fab Platinum 45-0550, Руководство по сборке

Результаты поиска

Содержание Platinum 45-0550

Отзывы:

Похожие инструкции для Platinum 45-0550

Бренды по названию

Популярные бренды