6
aSSeMBLe THe BLade MOUNT aSSeMBLY
STeP 3:
(See fIGURe 3)
•
Attach four pivot brackets (4) to the blade mount
assembly (5) using four hex bolts (A) and Nyloc hex
nuts (C).
•
To help align the pivot brackets (4), temporarily insert
the pivot shaft (14) through the holes in the pivot
brackets.
•
Remove the pivot shaft (14) once the pivot brackets (4)
are securely attached to the blade mount assembly (5).
A
C
A
5
4
4
14
A
A
fIGURe 3
aTTaCH THe BLade MOUNT aSSeMBLY TO
THe HITCH MOUNT aSSeMBLY
STeP 4:
(See fIGURe 4)
•
Insert the blade mount assembly (5) into the hitch
mount assembly tube (2).
•
Secure with a hex bolt (A), washer (E), and Nyloc hex
nut (C).
A
5
2
E
C
fIGURe 4
aSSeMBLe THe PUSHeR WaLL
aSSeMBLIeS
STeP 5:
(See fIGURe 5)
•
Assemble the pusher wall frame by inserting two
vertical tubes (6) into two horizontal tubes (7), making
sure the curvature of the horizontal tubes match.
•
Repeat to assemble the second frame.
7
7
6
6
fIGURe 5
STeP 6:
(See fIGURe 6)
•
With the assembled frame lying flat and the greater
angle to the right, place a pusher wall (8) on top with
the stitching facing the frame.
•
Align the pusher wall holes with the holes in the frame
and attach using six hex bolts (S), washers (G), and
hex nuts (H) in the holes shown.
•
Make sure the two hex bolts on the vertical part of the
frame are on the side with the greater angle as shown.
•
Tighten the six hex nuts.
•
Add an acorn hex nut (T) to each hex bolt and tighten.
This is now the right pusher wall assembly with the
hex bolts at the top.
T
H
G
S
8
Top
View
fIGURe 6
