5
TOOLS ReqUIRed fOR aSSeMBLY
(1) Adjustable Wrench
(2) 7/16" Wrenches
(2) 1/2" Wrenches
(2) 9/16" Wrenches
Lay out and identify the parts and hardware using the
illustrations on page 3 and page 4.
aSSeMBLe THe HITCH MOUNT aSSeMBLY
STeP 1:
(See fIGURe 1)
•
Insert a slider tube (1) into each end of the hitch
mount assembly (2)
•
Attach the slider tube to the hitch mount assembly
using two hex bolts (A), washers (B), and Nyloc hex
nuts (C). Do not tighten.
1
1
2
A
B
C
B
fIGURe 1
STeP 2:
(See fIGURe 2)
•
Attach the hitch mount assembly (2) to the tractor
frame using two U-bolts (D) secured with two
mounting brackets (3), four washers (B), and four
Nyloc hex nuts (C). Do not tighten.
•
If the slider tube does not fully extend into both
U-bolts (D), then loosen the appropriate hex bolt (A)
and reposition the slider tube (1).
•
Center the hitch mount assembly on the tractor frame.
•
Tighten all hex bolts.
D
1
3
B
C
2
A
fIGURe 2
aSSeMBLY INSTRUCTIONS
