4
Start initial setup
During the initial setup, you can set the following options.
Basic Usage
Turning on and off AGPTEK-C10:
Note: Do Not power on/off the player frequently.
To reset or format the device: Find
Settings > Factory settings/Format device, choose Yes
or No to make or cancel the changes.
Note: Reset or format the device will delete all of the data in this player. Before formatting the
device, please backup the files so as not to lose any files.
Charge the player
：
1. Use 5V/500mA charger only. Usually, it will need about 3 hours to charge the player.
2. Charge by computer: Connect the device to a running computer via included USB cable.
USB 2.0 port only. Usually, it will need about 3 hours to charge the player.
Note: If the charging condition does’t meet the standard, it may cause device malfunction,
which would be regarded as man-made damage.
Turn On
Press and hold the power button for 2 seconds
Turn Off
Press and hold the power button for 2 seconds
1.Press and hold the power button for 2 seconds until
AGPTEK-C10 is turned on.
2.When you turn on AGPTEK-C10 for the first time, the initial
setup wizard starts.During the initial setup, you can set the
language.
Connect the player to an adapter or computer USB
port via an USB 2.0 standard cable or the included
data cable to charge it.
