StingIR
USER MANUAL
15
3 MAINTENANCE
3.1 MAINTENANCE
3.1.1
CLEANING PROCEDURES
1. Gently brush off any dirt from the body of the device using a clean, soft cloth.
2. Moisten the cloth with fresh water and gently wipe down the external
surfaces (except lenses).
3. Dry any wet surfaces (except lenses) using another dry, clean, soft cloth.
4. Using a lens brush, carefully remove all loose dirt from the lenses.
5. Dampen a cotton swab with ethanol and slowly, gently wipe down the lenses.
Clean the glass surfaces using circular movements, starting from the center
of the lens and moving out towards the edge, without touching the lens
holder. Change the cotton swab after each circular stroke. Repeat this step
until the glass surfaces are clean.
6. Clean the accessories with a soft brush (or cloth) dampened with soap and
water.
3.1.2 PREPARING FOR EXTENDED STORAGE
CAUTION:
Thoroughly dry each item before placing them into the storage case.
To prepare the monocular for extended storage:
1. Clean the monocular and accessories.
2. Place all items into the storage case.
3.2 TROUBLESHOOTING
Table 3-1 lists the most common malfunctions that may occur with your
equipment. Perform the tests, inspections, and corrective actions in the order
they appear in the table.
This table does not list all the malfunctions that may occur with your device, or
all of the tests, inspections, and corrective actions that may be necessary to fix
them. If the equipment malfunction is not corrected by the suggested actions,
or a problem occurs that is not listed in this table, please contact AGM Global
Vision’s Customer Support center or your retailer.
