Drive/Motor Overload Protection
AGD155 Product Manual Rev.2.2
Page 47
Figure 39. I
2
T
In Agito PCSuite, the following parameters define the
𝐼𝐼
2
𝑇𝑇
characteristics:
Peak current
Continuous current
Peak time
Figure 40. I
2
T Settings
Note – The I2T algorithm does not support thermal memory protection or thermal
memory during power loss.
On drive power-up, the algorithm does not consider the amount of energy supplied to
the motor prior to power-up.
Note – The I2T algorithm does not consider motor speed. Therefore, the product does
not support thermal speed sensitivity.
