Agilent Technologies VPI Series, Инструкция по эксплуатации

Страница: 10 / 38

Vacuum Pump Isolation (VPI) Valve
10
Hazard and Safety Information
This manual uses the following standard safety protocols:
WARNING
The warning messages are for attracting the attention of the
operator to a particular procedure or practice which, if not
followed correctly, could lead to serious injury.
CAUTION
The caution messages are displayed before procedures, which
if not followed, could cause damage to the equipment.
NOTE
The notes contain important information.
Operators and service personnel must be aware of all hazards associated with this
equipment. They must know how to recognize hazardous and potentially hazardous
conditions, and know how to avoid them. The consequences of unskilled, improper, or
careless operation of the equipment can be serious. This product must only be operated and
maintained by trained personnel. Every operator or service person must read and
thoroughly understand operation/maintenance manuals and any additional information
provided by Agilent, Inc. All warning and cautions should be read carefully and strictly
observed. Consult local, state, and national agencies regarding specific requirements and
regulations. Address any safety, operation, and/or maintenance questions to your nearest
Agilent, Inc. office.
Vacuum Equipment and Cleanliness
Cleanliness is vital when servicing any vacuum equipment.
CAUTION
Do not use silicone oil or silicone grease.
Use powder-free butyl or polycarbonate gloves to prevent
skin oils from getting on vacuum surfaces.
Do not clean any aluminum parts with Alconox
®
. Alconox
is not compatible with aluminum and will cause damage.
NOTE
Normally, it is unnecessary to use vacuum grease.
However, if it must be used, avoid silicone types, and
use it sparingly. Apiezon
®
L grease is recommended
(Agilent Part Number 695400004).