Agilent Technologies TPS-mini 9699181, Руководство пользователя

Страница: 64 / 70

Technical Information
Window-Meanings
17
TPS-mini User Manual / 87-901-003-01 (E) 311/318
N. Read/
Write Data
Type Description Admitted Values
500 Reserved to Agilent service
503 R/W N RS 485 address 0 to 31
(default = 0)
504 R/W L Serial type select 0 = RS 232
1 = RS 485
(default = 0)
NOTE
1. Automatic means that when the controller stops, the vent valve is opened
with a delay defined by window n. 126; when the controller starts, the vent
valve is immediately closed.
2. On command means that the vent valve is opened or closed by means of
window n. 122.
3. These commands remove the pump motor supply for a short time. If they are
used continuously, they can cause the pump stopping.
7 6 5 4 3 2 1 0
TOO HIGH LOAD NO CONNECTION
SHORT CIRCUIT PUMP OVERTEMP.
OVERVOLTAGE CONTROLL. OVERTEMP.
Figure 35 Window N. 206 Bit Description