Agilent Technologies N5340A, Руководство по установке

Страница: 28 / 34

28 Installation Guide
3
Installing OBSAI Protocol Tester
Commenting these statements disables the automatic configuration of
the IP addresses.
4 Uncomment the following function for each serial I/O module:
#host < hostname for module >{
# hardware ethernet < MAC address of the module >;
# fixed-address < ip address to be assigned to this
module >;
#}
5
Replace the
< hostname for module >
parameter with the name of the
serial I/O module.
6 Replace the
< MAC address of the module >
parameter with the MAC
address of the serial I/O module.
You can find the MAC address of the serial I/O module on its label.
7 Replace the
< ip address to be assigned to this module >
parameter with the IP address of the serial I/O module.
The IP address of the serial I/O module should be within the defined
subnet.
8
Save the
dhcpd.conf
file.
9
Restart the DHCP service.
For information on restarting the DHCP service, refer to “To restart the
DHCP service" on page 26.
10
Reboot the serial I/O modules.
The new IP addresses are assigned to the serial I/O modules.