Agilent Technologies N5340A, Руководство по установке

Страница: 15 / 34

Setting Up the Hardware
2
Installation Guide 15
• For RP1 connection : Do the following:
• When you are using N5341A as a Base Station with CCM, connect
the RP1 receiver port of DUT to the
sync burst out port of the RP1
cable, and connect the RP1 cable to the RP1 port. The reference
clock of 30.72 MHz will be available on
Sys Clk Out .
• When you are using N5341A as an RF module, connect the sync
burst and system clock from DUT to the sync burst in and sys clk
in of the RP1 cable, and connect the RP1 cable to the RP1 port.
• For Ethernet connection : Connect the LAN cable to the ethernet port
of the module to provide ethernet functionality on the RP3- 01 port.
Ensure that the ethernet connection is configured at 10/100 Mbps.
This completes the hardware setup for the N5341A module.