Agilent Technologies N5340A, Руководство по установке

Страница: 12 / 34

12 Installation Guide
2
Setting Up the Hardware
Adjusting I/O Modules Inside the Chassis
To adjust I/O modules inside a chassis, you need to know how to attach
as well as remove them to and from chassis.
Attaching an I/O module to the chassis
To attach an I/O module to the chassis:
1 Insert the I/O module inside the empty slot and push it to adjust it
inside the empty slot.
Figure 1 Chassis with an Empty Slot
2 Tighten the screw locks of the I/O module.
The I/O module is now attached to the chassis.