Agilent Technologies N5340A, Руководство по установке

Страница: 26 / 34

26 Installation Guide
3
Installing OBSAI Protocol Tester
9
Type in the following information in the IP address , Subnet mask , and
Default gateway text boxes.
IP address: 10.0.0.1
Subnet mask: 255.0.0.0
10 Click OK .
11 Click OK.
Configuring DHCP
To configure DHCP, you need to update the DHCP configuration file
(
dhcpd.conf
), restart the DHCP service, and update the DHCP registry
file (
dhcpd.reg
) and the system registry.
In this section, you will learn to:
• “To update the DHCP configuration file
• “To restart the DHCP service
• “To update the DHCP registry file and the system registry
To update the DHCP configuration file
1
Go to the
c:\dhcpdnt
directory.
2
Open the
dhcpd.conf
file in a text editor.
3
Modify the
subnet
,
netmask
, and
range dynamic-bootp
parameters,
as desired.
4 Save the
dhcpd.conf
file.
5 Close the
dhcpd.conf
file.
To restart the DHCP service
1
Click Start - Settings - Control Panel .
The Control Panel window appears.
2 Double- click the Administrative Tools icon.
The Administrative Tools window appears.
3
Double- click the Services icon.
The Services window appears.
N O T E
Before you move to the next section, ensure that the controller PC is
connected with the chassis.