Agilent Technologies N5340A, Руководство по установке

Страница: 13 / 34

Setting Up the Hardware
2
Installation Guide 13
Removing an I/O module from the chassis
To remove an I/O module from the chassis:
1 Unscrew the screw locks.
Figure 2 Screw locks on the Chassis
2
Pull the extractor levers outside the chassis.
3
Pull out the I/O module to remove it from the chassis.
Once you have removed the I/O module from the chassis, hold it by the
front panel and metal case, and place it on a hard and flat surface.
WA R N I N G
Do not directly touch any component on the I/O module. It may be
hot.
C A U T I O N
Components on the I/O module are sensitive to the static electricity.
Therefore, take necessary anti-static precautions, such as wear a
grounded wrist strap, to minimize the possibility of electrostatic
damage. Also, you should not operate a chassis with empty slots.
Fill empty slots with blanking plates to ensure correct operation on
the chassis.