manualshive.com logo in svg

Agilent Technologies N5171B, Руководство пользователя, Страница: 37 / 48

Поделиться
Скачать
Agilent Technologies N5171B Скачать руководство пользователя страница 37

37

Using Secure Display

8 Using Secure Display

NOTE

Front panel control of this feature is 

not

 available on PSG E8257N instruments (unless 

Option 340 is installed), or on E82x7C instruments with firmware revisions earlier than 

C.03.76. The feature can be activated remotely, however, using SCPI commands. Refer 

to the “System Commands” chapter of the instrument’s 

SCPI Command Reference

 for 

more information.

This function prevents unauthorized personnel from reading the instrument display or tampering with the 

current configuration via the front panel. When Secure Display is active, the display is blank, except for an 

advisory message, as shown in 

Figure 8-1

 below. All front panel keys are disabled.

To set Secure Display, press: 

Utility

 > 

Display

 > 

More

 > 

Activate Secure Display

 > 

Confirm Secure Display

Once Secure Display has been activated, the power must be cycled to re-enable the display and front panel 

keys.

Figure 8-1 

Signal Generator Screen with Secure Display Activated

Содержание N5171B

















































Отзывы:

Нет отзывов