Agilent Technologies MS40+ Скачать руководство пользователя страница 45

Страница: 45 / 90

Instructions for Use

Use

MS40+ Single Stage Rotary Vane Pumps User Manual / 87-901-008-01 (E)

45/90

Use

There are no special procedures for switching the pump on; it needs
only to be connected to the electric power by means of the bipolar
switch.

WARNING!

The pump is designed for operation with neutral or non-corrosive fluids. It is
absolutely forbidden to use potentially explosive or flammable substances.

Maintenance

Personnel responsible for pump operation and maintenance must be
well-trained and must be aware of the accident prevention rules.

WARNING!

Death may result from contact with high voltages. Always take extreme care
and observe the accident prevention regulations in force.

WARNING!

When machine is powered take care on account of moving parts and high
voltages.

Содержание MS40+



























































































Результаты поиска

Содержание MS40+

Отзывы:

Бренды по названию

Популярные бренды

Agilent Technologies MS40+, Руководство пользователя

Результаты поиска

Содержание MS40+

Отзывы:

Бренды по названию

Популярные бренды