Introduction
1
Quiet Cover MS Service Manual
9
Safety Information
General Information
The Quiet Cover MS conforms to the International
Electrotechnical Commission (IEC) 61010–1 safety standard.
It also conforms to the following regulations on
Electromagnetic Compatibility (EMC) and Radio Frequency
Interference (RFI):
•
CISPR 11/EN 55011: Group 1, Class A
•
IEC/EN 61326
•
AUS/NZ
This ISM device complies with Canadian ICES- 001. Cet
appareil ISM est conforme a la norme NMB—001 du Canada.
The Quiet Cover MS is designed and manufactured under a
quality system registered to ISO 9001.
Information
The Agilent Technologies Quiet Cover MS meets the following
IEC classifications: Category II, Pollution Degree 2, Class III.
The Quiet Cover MS has been designed and tested in
accordance with recognized safety standards and is designed
for use indoors. If it is used in a manner not specified by
the manufacturer, the protection provided by the instrument
may be impaired. Whenever the safety protection of the
Quiet Cover MS has been compromised, disconnect it from
all power sources and secure it against unintended
operation.
Refer servicing to qualified service personnel. Substituting
parts or performing any unauthorized modification to the
instrument may result in a safety hazard.
Symbols
Warnings in the manual or on the instrument must be
observed during all phases of operation, service, and repair
of this instrument. Failure to comply with these precautions
violates safety standards of design and the intended use of
the instrument. Agilent Technologies assumes no liability for
the customer’s failure to comply with these requirements.
