Agilent Technologies G6011A Quiet Cover MS, Руководство по обслуживанию

Страница: 18 / 30

18 Quiet Cover MS Service Manual
2
Replacement Procedures
3
Feed one screw through the finger guard and Quiet Cover
MS door from the outside. Slide the screw all the way in.
4 Install the fan and inside finger guard over the screw.
Install the remaining screws (see
Figure 9 ).
5
Install and tighten the nuts over the four screws and
finger guard.
6
Connect the fan cable to the fan connector of the wiring
harness.
Figure 9 Fan, showing installed finger guard, screw, and bolt
Finger guard
Screw