10
Installation Note E8364-90019
Step 2. Remove the Front Panel Assembly
Refer to
for this procedure.
1. With a T-10 TORX driver, remove the eight screws (item
{
) from the sides of the frame.
CAUTION
Before removing the front panel from the analyzer, lift and support the front of
the analyzer chassis.
2. Slide the front panel over the test port connectors.
3. Disconnect the front panel interface ribbon cable (item
|
). The front panel is now free
from the analyzer.
Figure 3
Front Panel Assembly Removal
NOTE
The figure above shows the E8363/4B front panel and floppy disk drive.
The E8363/4C front panel has a slightly different appearance and does not
include a floppy disk drive.
Содержание E8363BU-014
Страница 24: ...24 Installation Note E8364 90019 ...
