Agilent Technologies E3646A, Руководство пользователя, Страница: 53 / 211

Chapter 3 Front-Panel Operation and Features
Storing and Recalling Operating States
53
3
4 Save the operating state
N o t e Before proceeding with the steps listed below, ensure that the outputs are disabled
throughout the Recall procedure (the
CV
or
CC
annunciator turns off and the
OFF
annunciator turns on).
1 Turn on the recall mode.
Memory location “1” will be displayed in the recall mode.
2 Select the stored operating state.
You can select the above
RESET
mode to reset the power supply to the power-on state
without turning power off/on or without using ‘‘
*RST
’’ command over the remote
interface. See page 96 for more details on ‘‘
*RST
’’ command.
3 Recall the stored operating state.
• Remote interface operation:
Use the following commands to store and recall power supply state.
DONE
Recalling a Stored State
1: p15v_test
2: state2
reset
done
Store
Recall
Recall