Agilent Technologies E2259A Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 52

Agilent Technologies E2259A Скачать руководство пользователя страница 8

DECLARATION OF CONFORMITY

According to ISO/IEC Guide 22 and CEN/CENELEC EN 45014

5

Manufacturer’s Name:

Agilent Technologies, Incorporated

Manufacturer’s Address:

Measurement Product Generation Unit

815 14

th

ST. S.W.

Loveland, CO 80537 USA

Declares, that the product

Product Name:

Breadboard M Module Carrier

Model Number:

E2259A

Product Options:

This declaration covers all options of the above product(s).

Conforms with the following European Directives:

The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC
and carries the CE Marking accordingly

Conforms with the following product standards:

EMC

Standard

IEC 61326-1:1997+A1:1998 / EN 61326-1:1997+A1:1998
CISPR 11:1997 +A1:1997 / EN 55011:1998
IEC 61000-4-2:1995+A1:1998 / EN 61000-4-2:1995
IEC 61000-4-3:1995 / EN 61000-4-3:1995
IEC 61000-4-4:1995 / EN 61000-4-4:1995
IEC 61000-4-5:1995 / EN 61000-4-5:1995
IEC 61000-4-6:1996 / EN 61000-4-6:1996
IEC 61000-4-11:1994 / EN 61000-4-11:1994

Canada: ICES-001:1998
Australia/New Zealand: AS/NZS 2064.1

Limit

Group 1 Class A

[1]

4kV CD, 8kV AD
3 V/m, 80-1000 MHz
0.5kV signal lines, 1kV power lines
0.5 kV line-line, 1 kV line-ground
3V, 0.15-80 MHz
I cycle, 100%

Safety

IEC 61010-1:1990+A1:1992+A2:1995 / EN 61010-1:1993+A2:1995
Canada: CSA C22.2 No. 1010.1:1992
UL 3111-1:1994

IEC 950(1991) + A1(1992) + A2(1993) + A3(1994)
EN 60950(1992) + A1(1992) + A2(1993) + A3(1994)
CSA C22.2#950(1995)
UL 1950(1995)

Supplemental Information:

[1]

The product was tested in a typical configuration with Agilent Technologies test systems.

September 5, 2000

Date

Name

Quality Manager

Title

For further information, please contact your local Agilent Technologies sales office, agent or distributor.

Authorized EU-representative: Agilent Technologies Deutschland GmbH, Herrenberger Stra

β

e 130, D 71034 Böblingen, Germany

«
...
6
7
8
9
10
...
»

Содержание E2259A





















































Отзывы:

Нет отзывов