Agilent Technologies E1468A, Руководство пользователя

Страница: 22 / 84

22 Getting Started
Chapter 1
Terminal Module Wiring
Guidelines
User wiring to the Relay Matrix Switch modules is to the High (H) and Low
(L) connections on terminal module. Figure 1-10 gives guidelines to wire the
terminal modules. Maximum terminal wire size is No. 16 AWG. Wire ends
should be stripped 6mm (0.25 in.) and tinned. When wiring all channels,
use a smaller gauge wire (No. 20 - 22 AWG). The expansion connectors
allow you to create larger matrices. See "Creating Larger Matrices".
Figure 1-10. Wiring the Terminal Module
Tighten screw.
Insert wire into terminal.
Screw-Type
Make connections.
Remove clear cover.
3
1
VW1 Flammability
Use wire
Rating
size 16-26
AWG
0.2"
5mm
Tab
and release.
B. Press tab forward
A. Release screws.
Route wiring.
4
secure wires.
Tighten wraps to
wire exit panels.
Remove 1 of the 3
Remove and retain wiring exit panel.
2
Cut required
holes in panels
for wire exit
Replace Wiring Exit Panel
5
Keep wiring exit panel
hole as small as
possible
B. Press down and
tighten screws
Replace Clear cover
A. Hook in the top cover tabs
onto the fixture
6