manualshive.com logo in svg

Agilent Technologies 969-8935, Руководство пользователя

Поделиться
Скачать
Agilent Technologies 969-8935 Скачать руководство пользователя страница 92

Technical Information 

Pump Used with Corrosive Gases

 

 

17 

 

TV 551/701 SEM Navigator User Manual / 87-900-958-01(G) 

265/

276

 

Connection C – ELECTRICAL 

 

 

 

Figure 54

 

  

The turbopump is connected to the controller through an 8-pin 
connector. Pins B, C and D are the 3-phase supply to the motor, pins 
A and F are connected to the temperature sensor (NTC type, 30 K

Ω

 

resistance at 25 °C) and pin E is connected to the pump ground; pins 
G and H are not connected. 

If the temperature sensor is disconnected, the pump will not start. To 
prevent damage to the pump when the temperature exceeds 60 °C, 
the sensor automatically cuts out the power supply. 

Pump Used with Corrosive Gases 

To prevent damage to the bearings, an inert gas must flow into the 
pump body around the upper bearing towards the forevacuum line. 
To supply the inert purge gas (e. g. nitrogen) to the pump through the 
purge port, connect a gas purge valve between the pressure regulator 
and the pump. 

Содержание 969-8935








































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды