Agilent Technologies 969-8935, Руководство пользователя

Страница: 88 / 103

Technical Information
TV 551/701 SEM Controller Installation
17
TV 551/701 SEM Navigator User Manual / 87-900-958-01(G) 261/ 276
Side Mounting
NOTE
The L-shaped bracket (P/N 969-9349) is available as an option.
See the following figure.
1
Place the L-shaped bracket on the controller, with the pump
cable toward the bracket, and fix it by means of the three socket
head screws M5, the washers and the nuts. The 6 holes on the
bracket allows to mount the controller with the rotation angle
that you like;
2
Turn the pump upside-down;
3
Place the bracket on the pump bottom (the hole on the bracket
has the same diameter as the pump bottom flange);
4
Screw a little bit the three screws M6 in the holes on the pump
bottom;
5
Rotate the bracket until the controller is on the chosen position;
6
Tighten the screws properly;
7
Turn the pump again;
8
Plug the line card and connect the pump cable to the pump;
9
Connect the mating connector with the jumper on the interlock
signal to start the pump.