Agilent Technologies 81610A Скачать руководство пользователя страница 7

Страница: 7 / 118

Safety Considerations

Initial Safety Information for Return Loss Modules

Agilent 81610A/11A/12A/13A/14A Return Loss Module, Fifth Edition

Laser Safety Labels

Laser class 1 label

W A R N I N G

Please pay attention to the following laser safety warnings:

• Under no circumstances look into the end of an optical cable

attached to the optical output when the device is operational. The

laser radiation can seriously damage your eyesight.

• Do not enable the laser source when there is no fiber attached to the

optical output connector.

• The laser is enabled by pressing the gray button close to the optical

output connector on the front panel of the module. The laser is on

when the green LED on the front panel of the instrument is lit.

• The use of optical instruments with this product will increase eye

hazard.

• The laser module has a built-in safety circuitry which will disable

the optical output in the case of a fault condition.

• Refer servicing only to qualified and authorised personnel.

Figure 1

Class 1 Safety Label - Agilent 81610A/11A/12A/13A/14A

Содержание 81610A























































































































Результаты поиска

Содержание 81610A

Отзывы:

Agilent Technologies 81610A, Руководство пользователя, Страница: 7 / 118

Результаты поиска

Содержание 81610A

Отзывы: