Agilent Technologies 81610A Скачать руководство пользователя страница 108

Страница: 108 / 118

How to clean optical devices which are sensitive to mechanical stress and pressure

Cleaning Information

Agilent 81610A/11A/12A/13A/14A Return Loss Module, Fifth Edition

105

Preferred Procedure

Use the following procedure on most occasions.

Blow away any dust or dirt with compressed air.

If this is not sufficient, then

Clean the interface by rubbing a new, dry cotton swab over the

surface using a small circular movement.

Blow away any remaining lint with compressed air.

Procedure for Stubborn Dirt

Use this procedure when there is greasy dirt on the interface, and

using the preferred procedure is not sufficient. Using isopropyl

alcohol should be your last choice for recessed lens interfaces because

of the difficulty of cleaning out any dirt that is washed to the edge of

the interface:

Moisten a new cotton swab with isopropyl alcohol.

Clean the interface by rubbing the cotton swab over the surface

using a small circular movement.

Take a new, dry soft tissue and remove the alcohol, dissolved

sediment and dust, by rubbing gently over the surface using a small

circular movement.

Blow away any remaining lint with compressed air.

How to clean optical devices
which are sensitive to
mechanical stress and pressure

Some optical devices, such as the Agilent 81000BR Reference

Reflector, which has a gold plated surface, are very sensitive to

mechanical stress or pressure. Do not use cotton swabs, soft tissues or

other mechanical cleaning tools, as these can scratch or destroy the

surface.

Preferred Procedure

Use the following procedure on most occasions.

Blow away any dust or dirt with compressed air.

Procedure for Stubborn Dirt

To clean devices that are extremely sensitive to mechanical stress or

pressure you can also use an optical clean polymer film. This

Содержание 81610A























































































































Результаты поиска

Содержание 81610A

Отзывы:

Agilent Technologies 81610A, Руководство пользователя, Страница: 108 / 118

Результаты поиска

Содержание 81610A

Отзывы: