Agilent Technologies 4352B, Руководство по обслуживанию

Страница: 39 / 293

Figure 2-4. RF P ower Measurement A ccuracy T est Setup 1
Note
Connect the signal generator's 10 MHz frequency reference output to the
4352B EXT REF Input on the rear panel as shown in Figure 2-4. With this
conguration, both the signal generators and the 4352B are phased locked to
the same reference frequency to obtain a stable measurement.
4. Press 4
Preset
5 to initialize the 4352B.
5.
Press 4
Meas
5 ,
NNNNNNNNNNNNNNNNNNNNNNNNNNNNN
INST TYPE ,
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
INST TYPE: VCO TESTER to set the instrument type to T ester
Mode .
6. Press
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
MEAS: RF POWER to set the measurement item to RF P ower .
7. Set the signal generator output frequency to 10 MHz, and turn the signal generator output
ON.
8. A djust the signal generator output level around 6 dBm until the power meter reading is -10
dBm 60.1 dB .
9. Read the 4352B measurement result, and calculate the following formula:
T est Result (dB) = 4352B reading - (P ower Meter reading - Track(10M))
Record the calculated test result on the P erformance T est Record.
2-8 P erformance T ests