Agilent Technologies 4352B, Руководство по обслуживанию

Страница: 286 / 293

Error Messages (Alphabetical Order)
0150 String data error
This error , as well as errors 0151 and 0158, are generated when analyzing the syntax of a
string data element. This error message might be displayed if the 4352B detects an unknown
problem.
0158 String data not allowed
A string data element was encountered but was not allowed by the 4352B at this point in
parsing.
0130 Sux error
This error , as well as errors 0131 through 0139, are generated when parsing a sux. This error
message might be displayed if the 4352B detects an unknown problem.
0138 Sux not allowed
A sux was encountered after a numeric element that does not allow suxes .
0134 Sux too long
The sux contained more than 12 characters (see IEEE 488.2, 7.7.3.4).
0102 Syntax error
An unrecognized command or data type was encountered. F or example , a string was received
when the 4352B was not expecting to receive a string.
0310 System error
Some error , termed \system error" by the 4352B, has occurred.
59 T arget Freq Out Of Range
Indicates the 2nd or 3rd harmonic target frequency is not within the 4352B measurement range
(below 10 MHz or above 3 GHz) when
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
2xCARR ! CENTER or
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
3 x CARR ! CENTER is selected
in spectrum measurements .
At this time , the previous measurement conditions still remain [any of the sweep parameters
(start, stop , center , or span values) are not changed]. Check the DUT's output frequency .
90 TOO MUCH D A T A
Either there is too much binary data to send to the 4352B when the data transfer format is
FORM 2, FORM 3 or FORM 5, or the amount of data is greater than the number of points .
82 Thermometer Out Of Range
The 4352B's internal thermometer reading is out of the proper range .
A djustment or repair is necessary . Contact our service oce or the company from which you
purchased the 4352B.
Messages-13