Agilent Technologies 4352B, Руководство по обслуживанию

Страница: 287 / 293

Error Messages (Alphabetical Order)
0124 T oo many digits
The mantissa of a decimal numeric data element contains more than 255 digits excluding
leading zeros (see IEEE 488.2, 7.7.2.4.1).
0223 T oo much data
A legal program data element of block, expression, or string type was received that contained
more data than the 4352B could handle due to memory or related device-specic requirements .
0210 Trigger error
A trigger related error occurred. This error message might be displayed if the 4352B detects an
unknown problem related to errors 0211 through 0219.
0211 Trigger ignored
A GET , *TRG , or triggering signal was received and recognized by the 4352B but was ignored
because of the 4352B timing considerations . F or example , the 4352B was not ready to respond.
0113 Undened header
The header is syntactically correct, but it is undened for the 4352B. F or example , *XYZ is not
dened for the 4352B.
160 WRONG I/O PORT DIRECTION
The direction setting for the I/O port (input or output) is incorrect.
V erify that a signal from an external instrument is being sent to an input port, and a signal
from an output port is being sent to an external instrument.
79 X-tal PLL Unlocked (40 MHz)
The 4352B 's internal PLL cannot be locked.
V erify the reference frequency input to the EXT REF input connector on the 4352B rear panel
is 10 MHz 6 100 Hz.
80 X-tal PLL Unlocked (85.6 MHz)
The 4352B 's internal PLL cannot be locked.
A djustment or repair is necessary . Contact our service oce or the company from which you
purchased the 4352B .
Messages-14