Agilent Technologies 1670E Series, Руководство пользователя

Страница: 520 / 650

520
Using the LAN’s X Window Interface
Using the LAN’s X Window Interface
Example Pseudo telnet method using a UNIX computer
To enable windows to be initiated from the logic analyzer named
lp1660E, enter the following command on the computer running the
Xserver :
xhost +lp1660E
To connect to the command parser socket of the logic analyzer named
lp1660E, enter:
telnet lp1660E 5025
NOTE:
HP logic analyzers are not telnet servers. The UNIX command telnet is used to
make a connection to the analyzer command parser, which uses socket
number 5025. A telnet server would normally not need to have the socket
specified.
To start the XWindow interface on the computer whose IP address is
15.6.253.146 (and is running the Xserver) enter:
xwin on,"15.6.253.146:0.0"
If you are not planning on sending more commands to the logic
analyzer, close the telnet connection by typing the escape character,
and then "quit" when the telnet prompt appears. The escape character
is often Control-]; your telnet program should tell you when it opens
the connection.