manualshive.com logo in svg

Agilent Technologies 1670E Series, Руководство пользователя

Поделиться
Скачать
Agilent Technologies 1670E Series Скачать руководство пользователя страница 352

352

 

 

Logic Analyzer Reference

The Chart Menu

Min and Max scaling fields

When State is selected for the X axis, the minimum and maximum 
values can range from -8192 to +8192 for the 1660E-series logic 
analyzers, depending on the trace point location. For the 1670E-series 
logic analyzers, the values can range from -1 M to +1 M.

When Label is selected for either axis, the minimum and maximum 
values range from 00000000 hex to FFFFFFFF hex regardless of the 
axis, because labels are restricted to 32 bits.

Markers/Range field

The Marker/Range field is a toggle field. If the field is set to Range, X 
and Y range fields become available to set the chart minimum and 
maximum range points. If the field is set to Markers, a marker selection 
menu appears with marker choices available with the present analyzer 
configuration.

In a state analyzer with Count Off in the Trigger menu, only Pattern 
markers are available. With Count Time on, Time markers and 
Statistics markers become available. With Count States on, States 
markers are available. The markers function just like those of the 
Waveform and Listing displays.

Содержание 1670E Series











































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды