manualshive.com logo in svg

Agilent Technologies 1670E Series, Руководство пользователя

Поделиться
Скачать
Agilent Technologies 1670E Series Скачать руководство пользователя страница 376

376

 

 

System Performance Analysis (SPA) Software

System Performance Analysis Software

Number of samples per range. 

Displayed next to each bar is a value 

representing the number of samples for that range. The ratio of these 
values to total samples determines the relative size of the histograms. 
These values are updated as the repeated acquisitions are sorted and 
displayed.

Other States included/excluded. 

Usually the defined ranges will not 

cover the entire range of the specified label. The Other States included/ 
excluded field provides an optional histogram showing all activity on 
the specified label that does not fall within any of the defined ranges. 
By selecting excluded, the relative activity of only the defined ranges is 
displayed. If included is selected, the "other" histogram appears under 
the ranges.

If a range is turned off, any activity in that range is included in Other 
States. The activity of a turned off range is included in the other range 
whether included or excluded other states is displayed or not.

Trace Type: All States vs. Qualified States. 

State Histogram 

mode can qualify data as it is sampled. Qualifying data while sampling 
allows only data of interest to be stored, while the rest is thrown away.

When Trace Type is set to Qualified States, a new field appears in the 
upper row of the display. The new field, Specify States, is where the 
data qualification is defined. The data qualification is not limited only 
to the label selected in the State Histogram menu. It is defined over all 
labels in the Format Specification as a combination of values, in the 
current base, and don’t cares.

For example, a microprocessor target system memory may contain two 
arrays. In State Histogram, the address ranges of the arrays can be 
defined and the relative activity in the arrays monitored. But, what if 
you only want to monitor writes to the array? In this case, you can 
define the data qualification as "Memory Write" on the STATUS label.

States that do not meet the qualification criteria are not stored by the 
analyzer, so they are not included in Other States.

Содержание 1670E Series











































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды