AGI Batco 1500 Series: Batco FX1535FL, Инструкция по сборке

Страница: 69 / 128

P1512115 R8 69
Table 25 Gas Drive Installation Procedures (continued)
Item
Procedures
3
Section 4.24.3 – Install the Slider Mount on page 71
4
Section 4.24.4 – Install the Motor and Back Plates on page 73
5
Section 4.24.5 – Install the Rocker Arm on page 76
6
Section 4.24.6 – Electric Drive — Install the Overcenter Handle on page 77
7
Section 4.24.7 – Install the Pulleys and Belts, and if equipped, the Soft Start Electric Clutch on page 79
8 Section 4.24.8 – Install the Pulley Guards on page 84
9 Section 4.24.9 – Gas Drive — Battery Kit on page 86
10
Section 4.24.10 – Gas Drive — Fuel Pump on page 87
11
Section 4.26. – Gas Drive — Control Box on page 108
12
Section 4.27. – Gas Drive — EPA Tank Kit (for USA only) on page 109 or Section 4.28. – Gas Drive —
Tank Kit (for outside USA) on page 112
Table 26. Electric Drive Installation Procedures
Item Procedures
1
Section 4.24.1 – Install the Motor Mount on page 69
2
Section 4.24.2 – Install the Gearbox on page 70
3
Section 4.24.3 – Install the Slider Mount on page 71
4
Section 4.24.4 – Install the Motor and Back Plates on page 73
5
Section 4.24.5 – Install the Rocker Arm on page 76
6
Section 4.24.6 – Electric Drive — Install the Overcenter Handle on page 77
7
Section 4.24.7 – Install the Pulleys and Belts, and if equipped, the Soft Start Electric Clutch on page 79
8
Section 4.24.8 – Install the Pulley Guards on page 84
4.24.1 Install the Motor Mount
1. Attach the motor mount (1) to the conveyor tube brackets using with 7/16" x 1" bolts (2) and 7/16" locknuts
(3) (see Figure 48 ).
Note
Orient the motor mount precisely as shown in Figure 48 .
Table 27. Drive Mount Components
Item Description
1 Motor Mount
2
7/16" x 1" Bolt Gr8 Plated
3
7/16" Nylon Locknut Gr8
PORTABLE GRAIN BELT CONVEYOR – FIELD LOADER 4. ASSEMBLY