AGFEO AS 1x, Руководство пользователя

Страница: 76 / 228

1 - 46
System Telephones
ST 25 DECT 30 ST 30
To place a Call on Hold
You can put a call on hold in order to make an enquiry call via the ISDN exchange, however
this is only possible if your line is a Point-To-Multipoint connection. Note: This feature may
not be available from your network provider. (not available from network providers in the UK)
This feature would allow to make an enquiry call to another outside number even though no
line (B Channel) is available. The call is put on hold in the exchange therefore releasing a line
to be used to set up another call. You then can alternate between the calls by using the
SPLIT button.
Place a Call on Hold (may not be available
from network provider)
A
%
z
A
(
%
(
You are on an outside call (Point –to-Multipoint
only) Press the ISDN HOLD Button
Your hear external dial tone
Dial the required telephone number
The display on your phone will show
the current call connected to
Press the ESC button if the other party does
not answer and you want to return to your origi-
nal call
OR
Press the ISDN HOLD Button to switch between
calls.
On pressing the ESC Button you will clear the
current call and be returned to the other call.
Note
A call cannot be placed on hold in the exchange if you hear the error tone. You are connected
back to the other call by pressing the ESC button.
When you replace your receiver, you will clear both calls, the current and the holding one.
Call charges are incurred for the current call and for the one on hold.
A
%
z
A
(
%
(
A
A
z
z
A
IJH
A
z
IJH