manualshive.com logo in svg

AGFEO AS 1x, Руководство пользователя

Поделиться
Скачать
AGFEO AS 1x Скачать руководство пользователя страница 210

A - 6

Glossary

Emergency call numbers

The emergency call numbers can only be dialled with the system telephone lock activated.
When the handset is on the hook you only need to press the Alt key plus asterisk *
(emergency call 1) or # (emergency call 2) and confirm with OK to start dialling.

External dialling

External dialling means that you can make a call for another subscriber. For example the
secretary for the boss or the ST 30 for the DECT 30.

Identifying malicious callers - tracing

The „Malicious call tracing“ feature can only be used by special agreement with your
network provider. The ISDN exchange stores the number of the caller, your number, the
date and the time of the call. You can have the caller identified during the call. You activate
this procedure on the system telephone with the „Trace“ function key. A key combination is
used for this on analogue telephones.

Intercom function - announcement -
intercommunication

The connection of the system telephones (ST20/ST25/ST30) replaces an intercom system.
When a system telephone is called, the microphone switches on automatically (if
programmed) enabling you to talk and listen. If you have not switched on the automatic
microphone you have to use the handset or the loudspeaker key for intercommunication.
The microphone is not activated when an announcement is made to several telephones.
Announcements to system telephones can also be made from normal telephones.  Please
refer to the operator manuals for analogue terminals - Announcement for a description of
this procedure.

ISDN-hold

The ISDN-hold feature is only available at the multipoint connection. You can have your
external call held by the ISDN exchange to hold a refer-back conversation with a second
external subscriber on the same line. Then you can switch back to the first call. You can
also switch between the two calls (broker) or start a conference in the exchange.

You can reduce your call costs with the Least Cost Routing by using the respective cheapest
network provider. With the TK-LCR software every subscriber can set up his individual table
for cost-optimised telephoning or load existing tables in the system. Up to 8 providers must
be entered individually by a profile. In addition, 8 areas, e.g. city, region 50, German, Euro I,
mobile etc. can be freely defined.

Least Cost Routing - LCR

Содержание AS 1x





































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды