AGFEO AS 1x, Руководство пользователя

Страница: 133 / 228

2 - 3
Analogue and
ISDN-Phones
External Line Access
Making a Call
(Using Acces digit)
Setting External Seizure
Depending on your preference the system offers different modes to connect to an outside
line. Spontaneous seizure with internal will connect any number dialled to the exchange line.
To dial an extension you prefix the extension number with #. If your phone has no # button
then you are unable to make any internal calls. If you set the access to spontaneous then on
lifting the receiver you will hear external dial tone. With this setting you cannot make any
internal calls. This setting could be used for a faxmachine or a payphone. If you select the
setting with access digit then you have to dial 0 (or 9) to get an outside line. In this case you
would dial 9 and the required telephone number or the two digit extension number to make
an internal call.
h P S 51 P Z Q P ª
Replace
receiver set variant Acknowledgement
tone
0 = direct access off (external seizure
with "0" is on)
1 = direct access (spontaneous external
seizure with internal)
Liftreceiver Enter the External
seizure code
h Q P 9 Q P Z
Lift receiver
Internal dial tone External dial
tone Outside line
seizure with
„9" Enter the external phone
number
External
phone call
h Q P Z
Lift receiver
Internal dial tone Enter the internal phone
number
Internal
phone call
Making a Call
To make an internal call, pick up receiver and dial the 2 digit extension number. Note: Each
extensions can have two seperate numbers. Please contact your Telephone System Manager
for an Internal Telephone Directory.
To make an exchange line call depends on how your telephone system is programmed.
For users who’s extension is set to ‚Spontaneous line seizure with internal‘ just need to
dial the the required telephone number. If you would like to make a call to another extension
on your telephone system, then please prefix the extension number by #.
If a line access digit is set then you have to dial 0 (or 9 as the case may be) to get an outside
line and then dial the telephone number required. If you would like to call another extension
on your system, then just dial the two digit extension number.
If Call Forwarding is active on your line, then you will hear a special dial tone from the
telephone exchanger after you connect to the line. This will remind you that this or another
feature may be set in the exchange