AGFA Drystar 5500, Справочное руководство

Страница: 93 / 266

93
2900H EN 20071108 Advanced operation (Key-operator mode)
D
RYSTAR
5500/5503 R
EFERENCE MANUAL
Changing general image quality settings - Default densitometer
1
Perform steps 1 and 2 of the ‘Accessing the Change settings menu’ procedure on
page 70 .
2
On the ‘Change setting’ screen, press the Down key four times, followed by the
Confirm key to select ‘Image quality’.
The following screen will appear:
3
Press the Confirm key to select ‘General’.
The ‘General settings’ screen will appear:
4
Press the Down key once, followed by the Confirm key to select ‘Default
densitometer’.
The ‘Default densitometer’ screen is displayed:
The current default densitometer is marked with an *.
5
Press the Up/Down arrow keys to select the default densitometer.
6
Press the Confirm key to store the data, or the Escape key to quit the procedure
without any changes.
All shown densities will vary slightly according to the densitometer selection. Refer
to
‘Drystar media density response data’ on page 237 .
2 <Modality name>
3 <Modality name>
4 <Modality name>
5 <Modality name>
6 <Modality name>
7 <Modality name>
* Macbeth TR924
Gretag
X-Rite 301
X-Rite 310
X-Rite 331
X-Rite 341