manualshive.com logo in svg

AGFA 5540/100, Руководство пользователя

Поделиться
Скачать
AGFA 5540/100 Скачать руководство пользователя страница 204

Remarks for HF-emission and immunity

It is hereby certified that the device has interference suppression according to

the EN 55011 Class A as well as the FCC Rules CFR 47 Part 15 Class A.
This device was tested for a normal hospital environment as described above.
The user of the device should ensure that it is used in such an environment.
This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment

generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at his own expense.

WARNING:

This device is intended for use by healthcare professionals only.

This device may cause radio interference or may disrupt the

operation of nearby equipment. It may be necessary to take

mitigation measures, such as re-orienting or relocating the

device or shielding the location.

WARNING:

The HF-emission and immunity can be influenced by connected

data cables depending on length and the manner of installation.

This device is intended for operation in the electromagnetic environment

given below. The user of the device should ensure that it is used in such

an environment.

RF Emission

Measure-

ments

Agree-

ment

Electromagnetic Environment Guidelines

High frequen-

cy RF emis-

sions in ac-

cordance with

CISPR 11

Group 1 The device uses high frequency energy exclusive-

ly for its internal functions. For this reason, its

high frequency RF emission is very low and it is

improbable that neighboring electronic equip-

ment will be disrupted.

High frequen-

cy RF emis-

sions in ac-

cordance with

CISPR 11

Class A

The emissions characteristics of this equipment

make it suitable for use in industrial areas and

hospitals (CISPR 11 class A). If it is used in a resi-

dential environment (for which CISPR 11 class B

is normally required) this equipment might not

204

 |  Valory (system with floor mounted column) | Product Information

0426A EN 20220804 1858

Содержание 5540/100




















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды